UNIFLEX Advanced series

Light, quiet all-rounder with a wide range of applications*

  1. Universal Mounting Bracket (UMB) with integratable strain relief comb

  2. Designs with inward or outward opening crossbars

  3. Extremely fast and easy to open due to ball joint mechanism

  4. Frame stay

  5. Single-part links (design 020)

  6. Favorable ratio of inner to outer width

  7. Many separation options for the cables

  8. Robust, double stroke system for long unsupported lengths

  9. Easy divider fixing

  10. Extremely low noise due to internal noise damping

  11. Lateral wear surfaces

  12. Single-part end connectors with integratable strain relief comb

Example of inner distribution:

Inner distribution

IPA

IPA

  • Inner heights
    20 – 44 mm
  • Inner widths
    15 – 250 mm
  • Pitch
    32.0 – 66.5 mm
  • Additional load
    up to 15 kg/m
  • Travel length
    unsupported

    up to 7 m
  • Travel length
    gliding

    up to 150 m
  • Travel speed
    up to 10 m/s
  • Travel
    acceleration

    up to 50 m/s2

Features

Fixable dividers for arrangement laying on its side and applications with high lateral Travel accelerations – no additional spacers required

Lateral wear surfaces – for long service life for applications where the carrier is rotated through 90°

Simple fixing of strain relief comb or C-Rail in the connector

  • Universal connection options
  • Extensive unsupported lengths
  • High torsional rigidity
  • Good ratio of inner to outer width
  • Low noise emissions
  • Numerous custom material types for custom applications available
  • Easy assembly
  • Fast cable laying
  • Assembly tools available
  • Stays with ball joint, opening on both sides
  • Strain relief integrated into the end connector
  • Many possibilities for internal subdivision
  • Optionally with C-rail integrated in the end connector
  • Wear surfaces for gliding applications involving long travel lengths
  • Fixable dividers

Selection criteria for UNIFLEX Advanced

  • If easy, single-sided opening of the crossbars from inside or outside is required
  • If cables have to be assembled quickly
  • If an optional divider fixing should be available (e.g. for cable carrier laying on its side)
  • If a gliding arrangement should be optionally available
  • If additional loads up to 10 kg/m are required
  • If a plastic crossbar is required
  • If an integrated strain relief is required
  • If horizontal cable partitioning is desired
  • If a frame stay is required (e.g. for large hose diameters)
  • long travel length
  • cannot be opened
  • open inward/outward
  • sliding dividers
  • fixable dividers
  • height separation possible
  • quiet running/low noise
  • ESD material
  • suitable for explosive atmospheres
  • heat-resistant
  • cold-resistant
  • flame-resistant V0 (UL94)
  • flame-resistant V2 (UL94)

overview pictographs

Type

hi
[mm]

Bi
[mm]

t
[mm]

UA1320

20

15–65

32.0

UA1455

26

25–103

45.5

UA1555

38

50–200

55.5

UA1665

44

50–250

66.5

* Some features can be different for certain types for design reasons.

Subject to change.

The Tsubaki Eco Link logo is used only on products that satisfy the standards for environmental friendliness set by the Tsubaki Group.

ECO & €CO: Our environmental activities

 

Questionnaire

Contact us to find a solution to your individual application problem.

Your contact person

© 2016 TSUBAKI KABELSCHLEPP GmbH
한국카벨슈렙 주식회사 | 경기도 성남시 중원구 상대원동 190-1 SKn테크노파크 테크센터 1312호
Tel: 031-776-4420 | Fax: 031-776-4424 | sale@kskorea.kr