QuickTrax

Compact and cost-effective cable carriers in two-component technology

  1. Sturdy two-component design: Hard cable carrier body, flexible film hinge

  2. Chain links made of plastic

  3. Extensive unsupported length

  4. Inside space is gentle on the cables – no interfering edges

  5. Extremely low noise due to integrated noise damping

  6. Quick and easy to open

  7. For inward/outward opening

  8. Dividers and height separations for cable separation

  9. Single-part end connectors with and without integratable strain relief

Example of inner distribution:

Inner distribution
  • Inner height
    20 mm
  • Inner widths
    15 – 50 mm
  • Pitch
    32 mm
  • Additional load
    up to 2 kg/m
  • Travel length
    unsupported

    up to 2 m
  • Travel length
    gliding

    up to 80 m
  • Travel speed
    up to 10 m/s
  • Travel
    acceleration

    up to 50 m/s2

Features

Easy to open …

… even without tools

High side stability

Reliable cable separation

  • Extremely fast and easy cable laying thanks to crossbar with film hinge
  • Extremely low noise due to integrated noise damping
  • Extensive unsupported length
  • Each chain link consists of two different materials:
    • Hard cable carrier body made of glass fiber-reinforced material
    • Crossbar with flexible film hinge made of elastic special plastic
  • Sturdy chain design
  • High torsional rigidity

Selection criteria for QuickTrax

  • Where extremely fast cable laying is required
  • For high fill levels
  • Where an extensive unsupported length is required
  • Where rigidity is required
  • For low noise applications
  • long travel length
  • open inward/outward
  • sliding dividers
  • height separation possible
  • quiet running/low noise
  • ESD material
  • suitable for explosive atmospheres
  • heat-resistant
  • cold-resistant

overview pictographs

Type

hi
[mm]

Bi
[mm]

t
[mm]

QT0320

20

15–50

32

Cable carrier design

Cable carrier design

Solid plastic cable carriers: Side bands and end connectors made of plastic

Each chain link consists of two different materials:

  • Hard cable carrier body made of glass fiber-reinforced material
  • Crossbar with flexible film hinge made of elastic special plastic

The two-component technology of the QT0320

The two-component technology

The two-component technology of the QT0320 combines two seemingly incompatible features: Stability and flexibility.

Cable carriers need to be extremely sturdy, with extensive unsupported length. At the same time, cables need to be inserted easily for fast cable laying.

The QT0320 meets these requirements thanks to its innovative design and material combination of a hard cable carrier body made from glass fiber-reinforced material and crossbars with a film hinge made from rigid special plastic.

Comparison of dimensions

Manufacturer

hi
[mm]

hG
[mm]

t
[mm]

Identical connection
hole pattern

QT0320

20.0

25.5

32.0

yes

Competitive product

17.5

23.0

30.5

yes

Comparison of bending moment

Comparison of bending moment

Comparison of bending strength

Comparison of bending strength

Load diagram

for unsupported length depending on additional load

Load diagram

Advantages over competitive product

  • 20 % longer unsupported length compared to competitive product
  • 33 % greater additional load through use of fiber glass reinforced plastic
  • Greater inner height
  • Low noise operation due to internal damping system
  • High side stability through locking in the stroke system
  • Dividers can be used for cable separation

Subject to change.

The Tsubaki Eco Link logo is used only on products that satisfy the standards for environmental friendliness set by the Tsubaki Group.

ECO & €CO: Our environmental activities

 

Questionnaire

Contact us to find a solution to your individual application problem.

Your contact person

© 2016 TSUBAKI KABELSCHLEPP GmbH