EasyTrax

Extremely fast cable laying thanks to easy cable insertion

  1. Sturdy two-component design: hard cable carrier body, flexible film hinge

  2. Chain links made of plastic

  3. Extensive unsupported length

  4. Inside space is gentle on the cables – no interfering edges

  5. Extremely low noise due to integrated noise damping

  6. For inside/outside opening

  7. Dividers and height separations for cable separation

  8. Single-part end connectors with and without integratable strain relief

Example of inner distribution:

Inner distribution

IPA

  • Inner heights
    4.6 – 18 mm
  • Inner widths
    7 – 50 mm
  • Pitch
    11.5 – 32 mm
  • Additional load
    0.25 – 2 kg/m
  • Travel length
    unsupported

    0.6 – 2 m
  • Travel length
    gliding

    10 – 80 m
  • Travel speed
    3 – 10 m/s
  • Travel
    acceleration

    10 – 50 m/s2

Features

Fast and easy installation of cables and hoses

Very high filling level

High side stability

Divider systems for reliable cable separation

  • Extremely fast cable laying thanks to easy cable insertion
  • Very high fill level due to the crossbar pivoting to the side – crossbars do not pivot into the cable space
  • Each chain link consists of two different materials:
    • Hard cable carrier body made of glass fiber-reinforced material
    • Crossbar with flexible film hinge made of elastic special plastic
  • Sturdy chain design
  • High torsional rigidity
  • Extensive unsupported length
  • Extremely low noise due to integrated noise damping

Selection criteria for EasyTrax

  • Where extremely fast cable laying is required
  • For high fill levels
  • Where an extensive unsupported length is required
  • Where rigidity is required
  • For low noise applications
  • long travel length
  • open inward/outward
  • sliding dividers
  • height separation possible
  • quiet running/low noise
  • ESD material
  • suitable for explosive atmospheres
  • heat-resistant
  • cold-resistant

overview pictographs

Type

hi
[mm]

Bi
[mm]

t
[mm]

ET0115

4.6

7

11.5

ET0320

20

15–50

32

Cable carrier design

Two-component technology

Solid plastic cable carriers: side bands and end connectors made of plastic

Each chain link consists of two different materials:

  • Hard cable carrier body made of glass fiber-reinforced material
  • Crossbar with flexible film hinge made of elastic special plastic

The two-component technology of the ET0320

Two-component technology

The two-component technology of the ET0320 combines two seemingly incompatible features: stability and flexibility.

Cable carriers need to be extremely sturdy, with extensive unsupported length. At the same time, cables need to be inserted easily for fast cable laying.

The ET0320 meets these requirements thanks to its innovative design and material combination of a hard cable carrier body made from fiber glass reinforced material and crossbars with a film hinge made from rigid special plastic.

Comparison of dimensions

Manufacturer

hi
[mm]

hG
[mm]

t
[mm]

Identical connection hole pattern

ET0320

20.0

25.5

32.0

yes

Alternative product

17.5

23.0

30.5

yes

Comparison of bending moment

Comparison of bending moment

Comparison of bending strength

Comparison of bending strength

Load diagram

for unsupported length depending on additional load

Load diagram

Advantages over alternative product

  • 20 % longer unsupported length compared to alternative product
  • 33 % greater additional load through use of fiber glass reinforced plastic
  • Greater inner height
  • Low noise operation due to internal damping system
  • High side stability through locking in the stroke system
  • Dividers can be used for cable separation

Subject to change.

The Tsubaki Eco Link logo is used only on products that satisfy the standards for environmental friendliness set by the Tsubaki Group.

ECO & €CO: Our environmental activities

 

Your contact person

© 2016 TSUBAKI KABELSCHLEPP GmbH