ME1250 RE

Plastic stay RE – frame screw-in stay

  • Plastic profile bars for light and medium loads. Assembly without screws.
  • Available customized in 16 mm width sections.
  • Opening options
    outside/inside:
    Release by turning by 90°.
ME1250 RE
  • Stay arrangement on
    every 2nd chain link
    (HS)
    , standard
  • Stay arrangement on
    every chain link (VS)
  • Bi from 71 – 551 mm
    in 16 mm width sections
Grafik Kettenbreite
  • The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
  • For rough environmental conditions, we recommend the use of OFFROAD glide shoes with 80 % higher wear volume.

Calculating the cable carrier width

  • Outer width Bk: Bk = Bi + 45 mm
  • Total width BEF: BEF = Bk + 3 mm

Pitch, inner height and chain link height

t
[mm]
hi
[mm]
hG
[mm]
hG'
[mm]
125 72 96 99.5

Bend radii

KR [mm]
180 220 260 300 340 380 500

Inner/outer width and intrinsic cable carrier weight

Bi
[mm]
Bk
[mm]
qk
[kg/m]
71 116 4.30
87 132 4.35
103 148 4.40
119 164 4.45
135 180 4.50
151 196 4.55
167 212 4.60
183 228 4.65
199 244 4.70
215 260 4.75
231 276 4.80
247 292 4.85
263 308 4.90
279 324 4.95
295 340 5.00
311 356 5.05
327 372 5.10
343 388 5.15
359 404 5.20
375 420 5.25
391 436 5.30
407 452 5.35
423 468 5.40
439 484 5.45
455 500 5.50
471 516 5.55
487 532 5.60
503 548 5.65
519 564 5.70
535 580 5.75
551 596 5.80

Divider systems

Divider

Movable divider
Version A (Standard)

As a standard, the divider system is mounted on each crossbar – for stay mounting on every 2nd chain link (HS).

As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

Divider

Fixable divider (16 mm grid)
Version B

The dividers are easily attached to the stay for applications with lateral acceleration and for applications laying on their side by simply turning the frame stay by 180°. The locking cams click into place in the locking grids in the crossbars (version B). The groove in the frame stay faces outwards.

Divider system TS0 without height separation

Divider system
Version A Version B
ST
[mm]
Wf
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
8 14.5 5 14.5 6.5 19.5 16 8 16
  • Chamber width ac: ac = ax – ST

Divider system TS1 with continuous height separation

Divider system
Version A Version B
ST
[mm]
Wf
[mm]
SH
[mm]
nT min
aTL/
aTR min
[mm]
ax min
[mm]
ac min
[mm]
aTL/
aTR min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
8 14.5 4 2 5 14.5 6.5 19.5 16 8 16
  • Chamber width ac: ac = ax – ST
  • Standard height separation with aluminum profile 11 × 4 mm. The dividers can be moved in the cross section.

Divider system TS2 with partial height separation

Divider system
Version A Version B
ST
[mm]
Wf
[mm]
SH
[mm]
nT min
aTL/
aTR min
[mm]
ax min
[mm]
ac min
[mm]
aTL/
aTR min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
8 14.5 4 2 5 14.5*/20 6.5*/12 19.5 16*/32 8*/24 16

* For VR0.

  • Chamber width ac: ac = ax – ST
  • With grid distribution (16 mm grid). Standard height separation with aluminum profile 11 × 4 mm. The dividers are attached by the height separation, the grid can be moved in the cross section (version A) or fixed (version B).

Divider system TS3 with height separation made of plastic section subdivisions

Divider system
Version A
ST
[mm]
ST twin divider
[mm]
Wf
[mm]
Wf twin divider
[mm]
SH
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
nT min
8 4 8 13 4 4 16/42* 8 2

* For aluminum section subdivisions

  • Chamber width ac: ac = ax – ST
  • The dividers are fixed by the partitions, the complete divider system is movable in the cross section. Movable twin dividers are optionally available. Twin dividers are also suitable for retrofitting in the section subdivision system.
ax (center distance of dividers) [mm]
ac (nominal width of inner chamber) [mm]
16 18 23 28 32 33 38 43 48 58 64 68 78 80 88
8 10 15 20 24 25 30 35 40 50 56 60 70 72 80
96 112 128 144 160 176 192 208              
88 104 120 136 152 168 184 200              
  • When using section subdivisions with ax > 112 mm we recommend an additional center support with a twin divider. The height separations VR8 and VR9 are not possible when using twin dividers. Aluminum section subdivisions are only available with ax> 42 mm.
Divider system
Plastic section subdivisions

Plastic section subdivisions in ax increments

Aluminum section subdivisions

Aluminum section subdivisions with plastic adapters in 1 mm increments

Divider system TS4 with continuous height and partial vertical partitions

Divider system
Version A
ST
[mm]
Wf
[mm]
SH
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
nT min
4 14.5 8 5 15 11 4
  • Chamber width ac: ac = ax – ST
  • Height separation with aluminum profile 27 × 8 mm. At least 2 half dividers with wrap-around design on both sides (design 1) have to be mounted in the upper and lower chamber near the side band.

Subject to change.

Questionnaire

Contact us to find a solution to your individual application problem.

Your contact person

© 2016 TSUBAKI KABELSCHLEPP GmbH