MK0650 RD

Plastic stay RD – frame stay with hinge

  • Plastic profile bars with hinge for light and medium loads. Assembly without screws.
  • Available customized in 8 mm width sections.
  • Opening options
    outside: Swivable to both sides.
    inside: Release by turning by 90°.
ME0650 RE
  • Stay arrangement on
    every 2nd chain link
    (HS)
    , standard
  • Stay arrangement on
    every chain link (VS)
  • Bi from 50 – 266 mm
    in 8 mm width sections
Grafik Kettenbreite
  • The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier width

  • Outer width Bk: Bk = Bi + 39 mm
  • Total width BEF: BEF = Bk

Pitch, inner height and chain link height

t
[mm]
hi
[mm]
hG
[mm]
hG'
[mm]
65 42 57 60.2

Bend radii

KR [mm]
75 95 115 145 175 220 260 275 300 350

Inner/outer width and intrinsic cable carrier weight

Bi
[mm]
Bk
[mm]
qk
[kg/m]
50 84 2.00
58 92 2.03
66 100 2.06
74 108 2.09
82 116 2.12
90 124 2.15
98 132 2.18
106 140 2.21
114 148 2.24
122 156 2.27
130 164 2.30
138 172 2.33
146 180 2.36
154 188 2.39
162 196 2.42
170 204 2.45
178 212 2.48
186 220 2.51
194 228 2.54
202 236 2.57
210 244 2.60
218 252 2.64
226 260 2.68
234 268 2.72
242 276 2.75
250 284 2.78
258 292 2.81
266 300 2.84

Divider systems

Divider

Movable divider
Version A (Standard)

As a standard, the divider system is mounted on each crossbar – for stay mounting on every 2nd chain link (HS).

As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

Divider

Fixable divider (8 mm grid)
Version B

The dividers are easily attached to the stay for applications with lateral acceleration and for applications laying on their side by simply turning the frame stay by 180°. The locking cams click into place in the locking grids in the crossbars (version B). The groove in the frame stay faces outwards.

Divider system TS0 without height separation

Divider system
Version A Version B
ST
[mm]
Wf
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
4.2 13 6.5 13 8.8 13 16 11.8 8
  • Chamber width ac: ac = ax – ST

Divider system TS1 with continuous height separation

Divider system
Version A Version B
ST
[mm]
Wf
[mm]
SH
[mm]
nT min
aT min
[mm]
aT max
[mm]
ax min
[mm]
ac min
[mm]
aT min
[mm]
aT max
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
4.2 13 4 2 6.5 25 13 8.8 13 29 16 11.8 8
  • Chamber width ac: ac = ax – ST
  • Standard height separation with aluminum profile 11 × 4 mm. The dividers can be moved within the cross section (version A) or fixed (version B).

Divider system TS2 with partial height separation

Divider system
Version A Version B
ST
[mm]
Wf
[mm]
SH
[mm]
nT min aTL/
aTR min
[mm]
ax min
[mm]
ac min
[mm]
aTL/
aTR min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
4.2 13 4 2 6.5 13 8.8 13 16 11.8 8
  • Chamber width ac: ac = ax – ST
  • With grid distribution (8 mm grid). Standard height separation with plastic profile 11 × 4 mm. The dividers are attached by the height separation, the grid can be moved in the cross section (version A) or fixed (version B).

Divider system TS3 with height separation made of plastic section subdivisions

Divider system
Version A
ST
[mm]
ST twin divider
[mm]
Wf
[mm]
Wf twin divider
[mm]
SH
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
nT min
8 3 8 12.5 4 4 16/42* 8 2

* For aluminum section subdivisions

  • Chamber width ac: ac = ax – ST
  • The dividers are fixed by the partitions, the complete divider system is movable in the cross section. Movable twin dividers are optionally available. Twin dividers are also suitable for retrofitting in the section subdivision system.
ax (center distance of dividers) [mm]
ac (nominal width of inner chamber) [mm]
16 18 23 28 32 33 38 43 48 58 64 68 78 80 88
8 10 15 20 24 25 30 35 40 50 56 60 70 72 80
96 112 128 144 160 176 192 208              
88 104 120 136 152 168 184 200              
  • When using section subdivisions with ax > 112 mm we recommend an additional center support with a twin divider. The height separations VR4 and VR5 are not possible when using twin dividers. Aluminum section subdivisions are only available with ax > 42 mm.
Divider system
Plastic section subdivisions

Plastic section subdivisions in ax increments

Aluminum section subdivisions

Aluminum section subdivisions with plastic adapters in 1 mm increments

Subject to change.

Questionnaire

Contact us to find a solution to your individual application problem.

Your contact person

© 2015 TSUBAKI KABELSCHLEPP GmbH
한국카벨슈렙 주식회사 | 경기도 성남시 중원구 상대원동 190-1 SKn테크노파크 테크센터 1312호
Tel: 031-776-4420 | Fax: 031-776-4424 | sale@kskorea.kr