TKA45.060

Stay variant 060 – covered on both sides with inside detachable cover

  • Plastic cover for rough environmental conditions with dirt, chips or spray water.
  • Fully detachable on one side in any position.
  • Opening options
    inside:
    Very quick release.
TKA45.060
  • Stay arrangement on
    every chain link (VS)
  • Bi from 50 – 150 mm
Cable carrier width
  • The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier width

  • Outer width Bk: Bk = Bi + 16 mm

Optional: Protection against chips up to 850 °C

On request, we also produce all TKA types in designs for protection against hot chips. The special material used protects the cables from hot chips up to 850 °C. Thus, downtimes due to hot chips that could destroy the cables are practically excluded.

Pitch, inner height and chain link height

t
[mm]
hi
[mm]
hG
[mm]
45.5 36 50

Bend radii

KR [mm]
82 95 125 145 170 200 230

Inner/outer width and intrinsic cable carrier weight

Bi
[mm]
Bk
[mm]
qk
[kg/m]
50 66 1.34
75 91 1.56
100 116 1.75
125 141 2.05
150 166 2.29

Divider systems

Divider

Movable divider
Version A (Standard)

As standard, the divider system is assembled at each 2nd chain link.

As standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

Divider

Fixable divider (2 mm grid)
Version B

The dividers are easily attached to the stay for applications with transverse acceleration and for laterally recumbent applications by simply turning them. The locking cams click into place in the locking grids in the covers (version B).

Divider system TS0 without height separation

Divider system
Version A Version B
ST
[mm]
Wf
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
2.5 8 4 8 5.5 a 8 5.5 2
Bi [mm] 50 75 100 125 130
a aTL/aTR min [mm] 11 11.5 12 12.5 11
  • Chamber width ac: ac = ax – ST

Divider system TS1 with continuous height separation

Divider system
Version A Version B
ST
[mm]
Wf
[mm]
SH
[mm]
nT min aT max
[mm]
aT min
[mm]
ax min
[mm]
ac min
[mm]
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
2.5 8 4 2 40 4 8 5.5 a 8 5.5 2
Bi [mm] 50 75 100 125 130
a aTL/aTR min [mm] 11 11.5 12 12.5 11
  • Chamber width ac: ac = ax – ST
  • Standard height separation with aluminum profile 9 × 2 mm.

Subject to change.

Questionnaire

Contact us to find a solution to your individual application problem.

Your contact person

© 2016 TSUBAKI KABELSCHLEPP GmbH
한국카벨슈렙 주식회사 | 경기도 성남시 중원구 상대원동 190-1 SKn테크노파크 테크센터 1312호
Tel: 031-776-4420 | Fax: 031-776-4424 | sale@kskorea.kr