UA1455.040

Stay variant 040 – with inside opening and detachable crossbars

  • Weight-optimized plastic frame with particularly high torsional rigidity.
  • Swivable and detachable on one side in any position.
  • Opening options
    inside
    : Swivable and detachable.
UA1455.040
  • Stay arrangement on
    every chain link (VS)
  • Bi from 25 – 130 mm
Grafik Kettenbreite
  • The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
  • Design 040 is not suitable for gliding arrangement.

Calculating the cable carrier width

  • Outer width Bk: Bk = Bi + 16 mm

Pitch, inner height and chain link height

t
[mm]
hi
[mm]
hG
[mm]
45.5 26 36

Bend radii

KR [mm]
52 65 95 125 150 180 200 225*

Inner/outer width and intrinsic cable carrier weight

Bi
[mm]
Bk
[mm]
qk
[kg/m]
25 41 0.73
38 54 0.75
58 74 0.80
78 94 0.88
103 119 0.98
130* 146 1.10

Divider systems

Divider

Movable divider
Version A (Standard)

As standard, the divider system is assembled at each 2nd chain link.

As standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

Divider

Fixable divider (2.5 mm grid)
Version B

The dividers are easily attached to the stay for applications with transverse acceleration and for laterally recumbent applications by simply turning them. The locking cams click into place in the locking grids in the crossbars (version B).

Divider system TS0 without height separation

Divider system
Version A Version B**
ST
[mm]
Wf
[mm]
nT max
design 020
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
2 7 a 3.5 7 5 b 7.5 5.5 2.5
Bi [mm] 25 38 58 78 103 130
a nT max design 020 0 2 5 7 11 15
b aTL/aTR min [mm] 5 4 4 4 4 5

** not design 020

  • Chamber width ac: ac = ax – ST

Divider system TS1 with continuous height separation**

Divider system
Version A Version B
ST
[mm]
Wf
[mm]
SH
[mm]
nT min
aTL/
aTR max
[mm]
aTL/
aTR min
[mm]
ax min
[mm]
ac min
[mm]
aTL/
aTR min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
2 7 2 2 20 3.5 7 5 a 7.5 5.5 2.5
Bi [mm] 25 38 58 78 103 130
a aTL/aTR min [mm] 5 4 4 4 4 5

** not design 020

  • Chamber width ac: ac = ax – ST
  • Standard height separation with aluminum profile 9 × 2 mm.

Divider system TS3 with height separation made of plastic section subdivisions**

Divider system
Version A
ST
[mm]
Wf
[mm]
SH
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
nT min
5 7 2.4 3.5 15 10 2

** not design 020

  • Chamber width ac: ac = ax – ST
  • The dividers are fixed by the partitions, the complete divider system is movable in the cross section.
ax (center distance of dividers) [mm]
ac (nominal width of inner chamber) [mm]
15 20 25 30 35 40 45 55 65 75
10 15 20 25 30 35 40 50 60 70
Divider system
Plastic section subdivisions

Plastic section subdivisions in ax increments

* on request

Subject to change.

Questionnaire

Contact us to find a solution to your individual application problem.

Your contact person

© 2016 TSUBAKI KABELSCHLEPP GmbH