MC0950 RV

Aluminum stay RV – frame stay reinforced

  • Aluminum profile bars with plastic adapter for medium to heavy loads and large cable carrier widths. Assembly without screws.
  • Available customized in 1 mm width sections.
  • Opening options
    outside/inside:
    Release by turning by 90°.
MC0950 RV
  • Stay arrangement on
    every 2nd chain link
    (HS)
    , standard
  • Stay arrangement on
    every chain link (VS)
  • Bi from 75 – 500 mm
    in 1 mm width sections
Grafik Kettenbreite
  • The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
  • For rough environmental conditions, we recommend the use of OFFROAD glide shoes with 80 % higher wear volume.

Calculating the cable carrier width

  • Outer width Bk: Bk = Bi + 39 mm

Pitch, inner height and chain link height

t
[mm]
hi
[mm]
hG
[mm]
hG'
[mm]
hG' Offroad
[mm]
95 58 80 83.5 86

Bend radii

KR [mm]
140 170 200 260 290 320 380

Inner/outer width and intrinsic cable carrier weight

Bi
[mm]
Bk
[mm]
qk
[kg/m]
75 114 3.32
100 139 3.47
150 189 3.79
200 239 4.11
250 289 4.43
300 339 4.75
350 389 5.07
400 439 5.38
450 489 5.70
500 539 6.02
  • The stated values for Bi are sample values in 50 mm sections. Stay variant RV is available in 1 mm width sections.
Grafik Kettengewicht

Divider systems

Divider
  • At least 2 dividers always have to be used.

Movable divider
Version A

As a standard, the divider system is mounted on each crossbar – for stay mounting on every 2nd chain link (HS).

As standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

Divider system TS0 without height separation

Divider system
Version A
ST
[mm]
Wf
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
nT min
4 14 4.5 14 10 2
  • Chamber width ac: ac = ax – ST

Divider system TS1 with continuous height separation

Divider system
Version A
ST
[mm]
Wf
[mm]
SH
[mm]
aTL/aTR min
[mm]
aTL/aTR max
[mm]
ax min
[mm]
ac min
[mm]
nT min
4 14 4 4.5 25 14 10 2
  • Chamber width ac: ac = ax – ST
  • Standard height separation with aluminum profile 11 × 4 mm. The dividers can be moved in the cross section.

Divider system TS2 with partial height separation

Divider system
Version A
ST
[mm]
Wf
[mm]
SH
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
nT min
4 16 4 4.5 14 10 2
  • Chamber width ac: ac = ax – ST
  • With grid distribution (1 mm grid). Standard height separation with aluminum profile 11 × 4 mm. The dividers are attached by the height separation, the grid can be moved in the cross section. Movable TS1 dividers can be used as an option.

Divider system TS3 with height separation made of plastic section subdivisions

Divider system
Version A
ST
[mm]
ST twin divider
[mm]
Wf
[mm]
Wf twin divider
[mm]
SH
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
nT min
8 4 4 13 4 4 16/42* 8 2

* For aluminum section subdivisions

  • Chamber width ac: ac = ax – ST
  • The dividers are fixed by the partitions, the complete divider system is movable in the cross section. Movable twin dividers are optionally available. Twin dividers are also suitable for retrofitting in the section subdivision system.
ax (center distance of dividers) [mm]
ac (nominal width of inner chamber) [mm]
16 18 23 28 32 33 38 43 48 58 64 68 78 80 88
8 10 15 20 24 25 30 35 40 50 56 60 70 72 80
96 112 128 144 160 176 192 208              
88 104 120 136 152 168 184 200              
  • When using section subdivisions with ax > 112 mm we recommend an additional center support with a twin divider. The height separations VR6 and VR7 are not possible when using twin dividers. Aluminum section subdivisions are only available with ax > 42 mm.
Divider system
Plastic section subdivisions

Plastic section subdivisions in ax increments

Aluminum section subdivisions

Aluminum section subdivisions with plastic adapters in 1 mm increments

Divider system TS4 with continuous height separation

Divider system
Version A
ST
[mm]
Wf
[mm]
SH
[mm]
aTL/aTR min
[mm]
ax min
[mm]
ac min
[mm]
nT min
4 14.5 8 7.5 15 11 4
  • Chamber width ac: ac = ax – ST
  • Height separation with aluminum profile 27 × 8 mm. At least 2 half dividers with wrap-around design on both sides (design 1) have to be mounted in the upper and lower chamber near the side band.

Subject to change.

Questionnaire

Contact us to find a solution to your individual application problem.

Your contact person

© 2016 TSUBAKI KABELSCHLEPP GmbH
한국카벨슈렙 주식회사 | 경기도 성남시 중원구 상대원동 190-1 SKn테크노파크 테크센터 1312호
Tel: 031-776-4420 | Fax: 031-776-4424 | sale@kskorea.kr