TKA series

Chip-tight right to the end

  1. End connectors with optional strain relief

  2. Interior gentle on the cables without projecting edges

  3. Integrated noise damper

  4. Dividers and height separation for separating the cables

  5. Quick and easy opening from any position

  6. Secure cover attachment even under severe stresses (e.g. due to hydraulic lines)

  7. Chain links made of glass fiber-reinforced plastic

  8. Pin/bore connection and stroke system covered completely

  9. Designs with inward or outward opening crossbars

  10. Cover completely detachable on one side

  11. Cover sheet for universal end connectors

Example of inner distribution:

Inner distribution

iF   IP54   German Design Award

  • Inner heights
    20.5 – 45 mm
  • Inner widths
    15 – 250 mm
  • Pitch
    30.5 – 55.5 mm
  • Additional load
    up to 10 kg/m
  • Travel length
    unsupported

    up to 6 m
  • Travel length
    gliding

    up to 150 m
  • Travel speed
    up to 9 m/s
  • Travel
    acceleration

    up to 45 m/s2

Features

Optimized utilization of the interior space; vertical and horizontal inner distribution possible

Easy-open covers from any position offer secure fastening

Triple-stroke system for extensive unsupported length

Universal end connector with option for integrating strain relief elements

  • Excellent cable protection in the connector area
  • Chip and dirt resistant due to smooth surfaces
  • Extensive unsupported length
  • High torsional rigidity
  • Good ratio of inner to outer width
  • Low noise emissions
  • Optional: On request, special material with protection against hot chips up to 850 °C
  • Numerous custom material types for custom applications available
  • Easy assembly
  • Fast cable laying possible
  • Easy-to-open cover with simultaneously high retention force on the chain link during operation
  • Measurement scale for easy alignment of the dividers
  • Strain relief can be completely integrated into the end connector (from TKA38)
  • TKA55: IP54 tested and certified

Selection criteria for TKA series

  • Where tightly sealed cable carriers are required
  • Where easy single-sided cover opening from any position is desirable (e.g. for cable inspection)
  • If an optional divider fixing should be available (e.g. for cable carrier laying on its side)
  • If a gliding arrangement should be optionally available
  • If additional loads up to 10 kg/m are required
  • If a plastic cover is desired
  • If a cable carrier with protection against hot chips up to 850 °C is required
  • long travel length
  • open inward/outward
  • covered cable carrier
  • sliding dividers
  • fixable dividers
  • height separation possible
  • quiet running/low noise
  • ESD material
  • suitable for explosive atmospheres
  • heat-resistant
  • cold-resistant
  • resistant to hot chips
  • flame-resistant V0 (UL94)
  • flame-resistant V2 (UL94)

overview pictographs

Type

hi
[mm]

Bi
[mm]

t
[mm]

TKA30

20.5

15–65

30.5

TKA38

26

25–130

38.5

TKA45

36

50–150

45.5

TKA55

45

50–250

55.5

Subject to change.

The Tsubaki Eco Link logo is used only on products that satisfy the standards for environmental friendliness set by the Tsubaki Group.

ECO & €CO: Our environmental activities

 

Questionnaire

Contact us to find a solution to your individual application problem.

Your contact person

© 2015 TSUBAKI KABELSCHLEPP GmbH